Aquagrey products
Aquagrey wall mountable filter housing
OK, so what's in the box?
1. Aquagrey internal filter cartridge.
2. External housing
3. Twin wall mounting brackets and rubber seals
4. 50mm inlet pipe
5. 50mm outlet pipe with baffles.
Aquagrey pre-filter
Designed to act as a pre-filter to the main housing, removes hair, and larger organic particles from entering the filter, thereby prolonging longevity. Needss to be cleaned on a regular basis
Aquagrey replacement grey water filter
A filter cartridge designed to be replaced every year. This unit features different levels of filtration mediums to bring grey water to a sufficient standard to safely be used for garden irrigation, vehicle and external washing, toilet flushing and washing machine re-use. The Aquagrey filter cartridge can be scaled to meet every potential use. It can sit in a housing externally on a wall for domestic situations or it can be placed within a suitable vessel to protect the filter in underground scenarios
1. Sprayguard anti-microbial impregnated reticulated foam
2. Sprayguard impregnated fleece filter pad
3. Activated carbon layer
4.Sprayguard anti-microbial impregnated reticulated foam
5.Sprayguard impregnated fleece filter pad
6.Activated carbon layer
7.Sprayguard anti-microbial impregnated reticulated foam
Underground housing for the Aquagrey filter commercial unit
Ideal for caravan sites, building sites etc Wishing to collect grey water and use it for toilet flushing, vehicle washing , irrigation etc.
This unit is a compact 250mm design with an internal baffle to prevent leaves and underground debris flowing on the surface of the water, and passing directly into the installation. 110mm spigot connections Size; 250mm - complete with frame and lid. Measurements; full length 780, bottom to mid invert 325mmmm. Unit features a 50mm inlet,which directly connects internally to the Aquagrey filter 160mm housing. Out let of the filter housing is via the base which then flows out of the 110 connection in the base direstly to the storage tank underground.
Aquagrey Indoor Grey Water Systems
Indoor system overview, daily output 1,000 up to 10,000 litre
Application
• Processes domestic water for properties with up to two hundred
persons
• Supplies water for toilets, washing machines and garden watering
by filtering grey water from basins and
• Complete system for Indoor installation
Benefits
• Space demand low, ideal for belated assembly
• Up to 50% water saving
• Patented air-lift technology for max. energy efficiency
• No chemical additives needed
• Fast, vacuum-based filter system
• Clear water meets or exceeds the European Directive quality level
for bath water
• Low maintenance & installation-friendly components
• Automated processes, remote maintenance optional
Technical specification
• Designed for a daily output up to 10000l (equates to the maximum
grey water output from up to 200 people)
• High efficiency through almost 100% saving of mains water for
flushing toilets and for laundering
• All components are compact
• Water treatment and storage outside the home
• Peak consumption periods are absorbed by means of buffer storage
• Operation via a 4-line display
• Can be combined with rainwater usage systems
• Remote maintenance and conversion analyses by means of GSM or
a fixed line optional
• Fault notification by SMS, email & fax Optional
Product description
The Aquagrey Indoor Grey Water system consists of three
components:
The aerobic treatment (AT) and Membrane Bio Reactor
(MBR) consists of several tanks to collect the grey water
from showers, baths and washbasins and for biological
preparation by means of venting and a preinstalled
filter unit (ultra filtration). This filters viruses, bacteria
and suspended matter out of the grey water. The purified
water is transported into the clear water tank without
the use of a further pump by means of patented airlift
technology.
The purified grey water is stored in the clear water tank
(CWT) and could be conveyed by a submerged force pump
to the points of use. If additional water is required, the clear
water tank could topped up with mains water in compliance
with EN1717.
Technical components: Aeration pump, vacuum unit and
system controller are pre-mounted on a console, which
could be installed easily inside of the building.
Download the data sheet for this item here
Aquagrey Retrofitting Grey Water Systems
Application
Retrofitting system overview, daily output 1.000 up to 10.000 litres
• Processes domestic water for properties with up to
two hundred persons
• Supplies water for toilets, washing machines and
garden watering by filtering grey water from basins
and showers
Benefits
• Retrofitting system for pre-installed tanks
• Low space demand, ideal for belated assembly
• Existing systems can be used furthermore
• Up to 50% water saving
• Patented air-lift technology for max. energy efficiency
• No chemical additives needed
• Fast, vacuum-based filter system
• Clear water meets or exceeds the European Directive
quality level for bath water
• Low maintenance & installation-friendly components
• Automated processes, remote maintenance optional
Technical specification
• Designed for a daily output up to 10,000l (equates to
the maximum grey water output from up to 200 people)
• High efficiency through almost 100% saving of mains
water for flushing toilets and for laundering
• All components are compact
• Water treatment and storage outside the home
• Peak consumption periods are absorbed by means
of buffer storage
• Operation via a 4-line display
• Can be combined with rainwater usage systems
• Remote maintenance and conversion analyses by
means of GSM or a fixed line optional
• Fault notification by SMS, email & fax
optional
Product description
The Aquagrey Retroffiting Grey Water systems consists of
three components (tanks are not included in the Aquagrey
Retrofitting grey water products):
The aerobic treatment (AT) and Membrane Bio Reactor
(MBR) consists of several tanks to collect the grey water
from showers, baths and washbasins and for biological
preparation by means of venting and a pre-installed filter
unit (ultra filtration). This filters viruses, bacteria and suspended
matter out of the grey water. The purified water is
transported into the clear water tank without the use of a
further pump by means of patented airlift technology.
The purified grey water is stored in the clear water tank
(CWT) and could be conveyed by a submerged force pump
to the points of use. If additional water is required, the clear
water tank could topped up with mains water in compliance
with EN1717.
Technical components: Aeration pump, vacuum unit and
system controller are pre-mounted on a console, which
could be installed easily inside of the building.
Download the technical specification sheet here.